Adjustable power supply using LM317

Adjustable power supply using LM317


For the LM317:


R2 = (192 x Vout) - 240, where R2 in ohms, Vout is in volts and must be at between 1.2 V and 35 V.

Vin should be at least 2.5V greater than Vout. Select a wall adapter with a voltage at least 2.5 V greater than your regulated output at full load

Maximum output current is 1 A. Use proper heatsink for LM317 if it has to dissipate more than 1W.

The tab of the LM317 is connected to the center pin.

0 comments:

Post a Comment

 
© 2009 electro,circuit, schema & Datasheet | Powered by Blogger | Built on the Blogger Template Valid X/HTML (Just Home Page) | Design: Choen | PageNav: Abu Farhan